Lowboy
35-Ton `10
50-Ton `10
55-Ton `10
60-Ton `10
Dump Trailer
30-Yard `10
45-Yard `10
60-Yard `10
80-Yard `10
Tagalong
20-Ton `10
25-Ton `10
6-Ton Low Pro `10
Hydraulic Tail
35-Ton `10
50-Ton `10
Hydraulic Tail
10
50-Ton, 3 Axle, Hydraulic Tail Trailer
General:
This Specification is for a Model# GTFH503-46-26, 35-Ton, 2 Axle, and Hydraulic Tail Trailer with a
Maximum Payload of 100,000 lbs Distributed and 70,000 lbs concentrated load in 12.
Dimensions:
Overall Length: 45 4 Ύ
Overall Width 8 6
Gooseneck: 11 1 Ύ (84 Swing Clearance)
5th Wheel Height: 48
Loadwell Length: 26 2
Loadwell Height: 38 (UnLoaded) - Hydraulic Tail: 8 1 - Flip Under Ramp: 4
Overall Width 8 6
Gooseneck: 11 1 Ύ (84 Swing Clearance)
5th Wheel Height: 48
Loadwell Length: 26 2
Loadwell Height: 38 (UnLoaded) - Hydraulic Tail: 8 1 - Flip Under Ramp: 4
Frame:
Cross Member: 10 on Loadwell & 4 on neck & rear deck.
Main Frame: 20 Fabricated I-Beam.
Main Frame: 20 Fabricated I-Beam.
Axles:
3 - 25,000 lbs Capacity Axles, 71 ½ Track.
King Pin:
2 Inch Heavy Duty, AAR Rated.
Wheels & Tires:
Tires: 12 ea 235/75R X 17.5 H Load Range, 16 Ply, Steel Belted Radials.
Wheels: 12 ea. 6.75 X 17.5, 8 Hole Hub Piloted Steel Disc Wheels.
Wheels: 12 ea. 6.75 X 17.5, 8 Hole Hub Piloted Steel Disc Wheels.
Brakes:
12 Ό X 7 ½ Full Air Brakes with Spring Parking Brakes, Automatic Slack Adjusters, with 4S2M ABS System.
Landing Gear:
2-Speed Landing Gear, Static Load Capacity 160,000 lbs, Lifting Capacity 50,000 lbs, Side Capacity 29,000#.
Rear Folding Tail:
Total 12 1 Hydraulic Tail with 8 1 of Top Platform & 4 Flip Under. Tail Will Lift 20,000 lbs. 4 Back
From the Hinge Pin. Automatic Locking Device. Rear Hydraulic Flip Out Extended Ramp Load Bearing with
Ό Steel Tread Plate Covering with 15° Loading Angle.
Suspension:
Cush Air Ride Suspension, w/ Dump Valve.
Electrical:
12-Volt Electrical System with Standard 7 Way SAE Connector, All Lighting LED in Rubber Grommet
Mounted to DOT Standards.
Hydraulics:
Wet-line Setup for Tractor.
Winch:
12,000# Electric Winch Mounted Front Center of The Upper Deck. Controls to Be Located on the Drivers
Side of the Upper Deck. 60 of ½ Steel Cable to Meet the Rating of the Winch be Installed with Pivoting
Cable Roller Guide.
Decking:
2 Oak Flooring, Secured to Frame with 5/16 Self-Taping Torque Screws & 1/4 Solid Diamond Plate Over
Wheels & Hydraulic Tail.
Tie Downs:
22 Ea D Ring Tie Downs 11 Ea Side.
Finish:
Sandblasted to Near White Primed and Top Coated Black.
Contract # GS-30-F-0027R
